This thesis investigates how inventory management is practiced at a Swedish sawmill company, how practice differs from theory in this field and how the company could make more use of this theory. To do this we have performed a study on relevant literature and compared our findings with a field study on Moelven Valåsen AB. Our analysis shows that a large gap between theory and practice exists. We identify several reasons to this, including some sector specific problems when calculating cost rate for timber inventories. Suggestions on solutions to these problems and an example of how a cost rate can be estimated with relatively simple means are presented.

The number of sawmills in Sweden has decreased dramatically since the 1980s and the trend looks set to continue. The sawmills that are left instead becomes larger and are situated farther apart. In northern Sweden, they are concentrated along the coastline.In our study, we compared conditions for running a sawmill in inland areas and coastal areas and looked at what factors have the greatest impact on the profitability of the sawmill in northern Sweden.We chose to compare different locals conditions for a sawmill that only sawn pine timber and had an annual raw material requirements of 300 000 m3ub per year. By analyzing the kNN-data from the Swedish National Forest Inventory we have taken out the size of the timber volume at each site and its catchment. We have also looked at possible competitors in the areas that may affect the purchase price of the commodity.

As demand for renewable energy is increasing rapidly, the market for biomass pellets is expected to continue to grow in the near future. Most of the new raw materials that are discussed for pellet production have one thing in common; the production costs will increase compared to using traditional raw materials such as sawdust and planer shavings. The aim of this thesis is to investigate to what degree increased use of new raw materials for pellet production will affect the general pellet prices in Sweden and to survey what plans Swedish pellet producers have concerning new raw materials. To investigate the raw material situation of the Swedish pellet producers an industry survey was performed. Literature studies were also made on previous research in the subject field. Calculations of the production costs for pellets were done for the raw materials sawdust, wet sawmill chips and energy wood respectively. New raw materials are already used by the large-scale pellet producers in Sweden.

The aim of this thesis is to find a statistical model that sort logs according to a predicted modulus of elasticity on the sawn boards. The input parameters for the model are X-ray variables from an X-ray scanner. For some of the log classes sawn at the sawmill it is desirable to have a narrow distribution of modulus of elasticity on the sawn boards. 250 pine logs from five different diameter classes were numbered and followed through the sawmill process. Log data were collected from X-ray and 3-D scanners in the log intake.

The sludgebark and to a certain extent the bark were until a decade ago waste products without any economic value that were thrown away. A number of environmental laws and increcing energy prices have improved the prerequisites for increasing the use of these materials. At Seskarö sawmill they burn the sludgebark and a great deal of the bark in the sawmill furnace. The sludgebark has a number of disadvantages compared to bark during burning. The sludgebark is often wet which means the energy net from burning often gets low.

This final thesis is initiated by the wood fuel department at the Swedish forest company Sveaskog as part of a project which also involves two other final thesises. The overall goal of the project is to investigate Sveaskog´s possibilities to produce and sell different wood fuel assortments in Västerbotten and the southern parts of Norrland. The aim of this thesis is to investigate how much wood fuel Sveaskog can produce in the area during the next five years and what that would cost. Furthermore the thesis will investigate the total possible supply of wood fuel from all other possible producers in the area. Treated assortments are forest residues from final fellings, whole trees from direct wood fuel thinnings, non industrial wood and industrial by-products from sawmills. The main effort to investigate Sveaskog´s production possibilities has been made to calculate the possible annual amount of forest residues and fuel from wood fuel thinnings that can be produced.

An old and well known problem in sawmilling is to determine which dimensions /products those are most profitable to produce. Existing optimization models maximize the value of the log. In other words, based upon the market prices of the dimensions the models calculate the best way to split the log. Yet there is a great uncertainty if the most well paid dimensions really are the most profitable to produce. The costs of the process from lumber to sawn products are hard to determine and are therefore often left out from the optimization process. In this study the economic contribution of different dimensions/products are analysed.

A change towards using more biofuels than fossil fuels is taking place in Sweden, and in many other parts of the world. This makes the use of fuel pellets increasingly popular, causing a greater demand for sawmill sawdust products. There is a trend towards the use of multiple types of shredders, instead of a single type in each sawmill. The purpose of the study was to characterize the different flows of saw particles that can be found at Sävar såg when cutting thick or thin wood with different cutting techniques. The saw particles size, shape, moisture content and heat value were analysed by the cutting stations: first cutting fast and slow, second cutting fast and slow, grading fast and slow and planning.

Swedish sawmills of today suffer from unsatisfying economy with high costs and low benefits. The economical result depends on how well the sawmill can use their raw material. Iggesund Timber AB, a sawmill in the Holmen group, produces a large amount is enduse orientated products for the woodworking industry. Therefore the aim of this student thesis was to investigate the possibility of automatic enduse orientated quality grading of Scots Pine (Pinus sylvestris) saw logs by using a gamma-ray log scanner. Iggesund Timber AB has the possibility to grade logs automatically with TINA, a two way gamma-ray log scanner. Grading and classification of Scots Pine logs in Sweden today are mainly manual but can in some rare cases be automatic.

Where is technology heading? And how will our behaviors towards these new innovations look? This project questions the direction of ?beyond smart? products, through scenarios within our everyday life. The work is both critical and speculative. Speculative in the sense that it is speculating in how a future scenario with ?beyond smart? products would look like.

This report is a thesis work for a B.Sc. in Forestry at the School for Forest Engineers, SLU. The work was an assignment from Jarlträ AB which is a privately owned sawmill located in southern Småland. The aim of the work was to investigate the economical result of different pricelists and how to adjust different parameters such as length correction to give an optimal result. The pricelists was examined through a computer program (SilviA). The pricelists was made in the program and after that a simulation was preformed with a selection of random sampled trees gathered from the area nearby the sawmill.

Where is technology heading? And how will our behaviors towards these new innovations look? This project questions the direction of ?beyond smart? products, through scenarios within our everyday life. The work is both critical and speculative. Speculative in the sense that it is speculating in how a future scenario with ?beyond smart? products would look like.

An increased demand for processed goods on the property market has contributed toinvestments within the Swedish sawmill industry. The purpose with this study is to make amarket investigation of pre cut lengths within a defined geographic area. The constituent forthis investigation is HAL (AB Hilmer Andersson) who invests in a new plane facility and twofinger jointing machines in affiliation to their sawmill in Lässerud, the vest part of Värmland.To investigate the demand of pre cut lengths and identifies the value creating factors and costfactors which the customer within the segments industry and property market perceive, havedifferent customer value theories been used. Theories of customer value and the theory aboutoffering has been the source of creating the qualitative interview with a selection of currentand new potential customers for HAL.The result of the study first gives an introduction of HAL?s new offering and a description ofHAL?s current customers, which gives the reader an understanding of why searching for newcustomers is made in the defined area.

Modern sawmills are using the raw-material and the production-capacity more efficiently today, due to rising raw-material prices and higher production costs. Log sweepness has a negative effect on the sawn yield, for sawmills with straight-sawing. It is desirable that these logs could be sorted based on more criteria, if it increases value-yield and consequently the utilization of raw-material. Bow-heights over 1 cm have a negative effect on sawn yield, since the surface of the mantle cuts down in the sawn pattern. Some of these small bow-heights reduce the logs yield of value which affects the production planning negatively. Nearly half of all the Swedish logs have a bow-height over 1 cm.

A woman is dying of cancer, she refuses to use her walking aid. Because she is embarrassed. This means she can?t leave her house, and her last days become very limited.Why do we act like this?Can the view we have of products adapted for disabled be changed by working with colour, texture, form and materials?There are many products adapted for disabled, the products often have a good function and well developed ergonomic aspects but the visual aspect leaves a lot to wish for. There is neither effort nor money put in to the exterior design of most of these products.A lot of the solutions that are invented for adapted products can be used in design of ?regular? products.Why should we then divide products in to adapted and non-adapted.